Therefore, a 20″ floor machine would use an: Lay the brush on the bristles block side up. Remove mounting hardware, if any. Do you want a brush or a pad driver? Please Sign In to Write Review.

Uploader: Negor
Date Added: 5 April 2013
File Size: 25.24 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 30177
Price: Free* [*Free Regsitration Required]

Best used with floor machines: Before using a new brush on carpeting, the brush should be broken in according to the following directions. Measure actual inside diameter of the center hole.

Malish Heavy Duty Sand Paper Driver 19in Clutch Included – – Sanding Screens &

The brush is now ready to be used on carpeting. If you have a variety of applications, your choice may be a pad holder.

Login Your Account Customer Service. Run the machine DRY for approximately minutes. Determining Diameters Block Diameter: The surface being cleaned and sxndpaper amount of dirt build-up will szndpaper determine the selection. Break-in Procedure Mount the brush on the floor machine. Measure the actual outside diameter of the block not the bristle flare.

  AUTOBABY MP3 DRIVER DOWNLOAD

Share With A Friend. When calling customer service toll FREE atplease have the machine manufacturer and model number to help determine the block size, center hole diameter and clutch plate necessary to attach the block to the machine.

Operate the machine on this surface. Basics of Floor Machine Brush Selection: If your preference is to have a dedicated product, select a brush. A brush, long-trim pad driver, or short-trim pad driver without a riser, should be 2″ smaller than the machine size. Therefore, a 20″ floor machine would use an: Once your brand of machine is found, continue down until you find the correct model.

Product Category

Measure actual inside diameter of the center hole. Break-in Procedure Mount the brush on the floor machine. Before using a new brush on carpeting, the brush should be broken in according to the following directions. Replacement Floor Machine Sanding Drivers.

The brush fibers will take a slight set or lean in the direction of machine rotation. Operate the machine on this surface.

  AVER A188C DRIVER DOWNLOAD

See photo below for reference measurement B. Determining Diameters Block Diameter: If the machine size is not apparent from the model number, please provide this specification. If your preference is to have a dedicated product, select a brush.

Eandpaper photo below for reference measurement D. How to Break in a Brush Before using a new brush on carpeting, the brush should be broken in according to the following directions. Measure the actual outside diameter of the block not the bristle flare.

20″ Malish Sandpaper Pad Driver

Lay the brush on the bristles block side up. Therefore, a 20″ floor machine would use an: Remove mounting hardware, if any. Pad drivers maish specified 1 inch smaller than the machine.