Not finding what you are looking for? Once the file stops growing, strip the ping output from the beginning and decode. The user can then configure firewall features after the system comes up. You can’t post answers that contain an email address. Total Number of Unavailable Seconds 32 4. May 18, Comtrend CT Router. Enter the secondary subnet mask for the LAN port.

Uploader: Nagal
Date Added: 9 June 2016
File Size: 57.48 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 57792
Price: Free* [*Free Regsitration Required]

The time when restrictions on the LAN device are lifted.

Answered on Jul 25, 26 views. And CPE will change the port mapping configuration automatically.

Changed the caps and everything was OK for a couple of years after that. When the log buffer is full, the newer event will wrap up to the top of the log buffer and overwrite the old event. Its purpose is to sign and issue certificates; in order to prove the owner information of that certificate is correct. The port mapping configuration will become: To use the bridge service, tick the checkbox, Enable Bridge Service, and enter the service name.


Trigger Port End Enter the ending trigger port number when you select custom application. You only need to follow the online instructions that you are prompted.

Comtrend CT-5621 – router – DSL modem – desktop

Please contact your ISP for the information. If you let ADSL start up, you’ll be spammed with messages about the link status.

Select Quick Setup and click Next. User rootpassword tcom may also work on some devices.

SG :: Comtrend CTT DSL Router

The types of errors counted include CRC errors. An Ethernet Link is not established. I’ve seen bulging capacitors inside this modem causing me problems. Two of the resistors and the capacitor get voltages right, while the third resistor is used to tie the USB host enabled pin on the BCM63xx to Vcc, so that it is seen cg-5621 enabled.

You may be surprised dt-5621 this is all it takes! Check for a reset button on the back or bottom of each. The default attributes are overridden when identical attributes with different values are configured. Tick the checkbox to enable the WAN service. This will be turned on when PortMapping is enabled. Access to your DSL router is controlled through three user accounts: This gives you an extremely limited shell even as root!


Click Back comtrendd you wish to modify the settings. To add a Trigger Port, simply click the Add button. For bridged mode, the indicator light is off. Many times the username and password are admin, admin by default. Click Configure System Log to display the following screen.

The following default settings are present when setting up the router for the first time. On some models it may be necessary to connect to the internal serial port and use the CFE prompt to change the board ID, or else the OpenWrt kernel will panic shortly after startup due to not recognizing the board. Lately during the filling cycle water hammer is occurring.

Mark IP Precedence Select between How often does this happen?